A heavy cart does not fail on a light floor. It fails because the bracket flexes, the bearing binds under load, or the tread cracks where the core meets the tire. A caster chosen by wheel size alone will not survive a daily loaded route; the fork, bearing and tread have to hold the same rating together.
The EH4 family is a heavy-duty top-plate caster built around a roller bearing and a pressed steel fork, sized from 4 to 8 inches for loaded platforms, machine-moving carts and material-handling racks. The 6-inch iron-core polyurethane swivel is the general-purpose model in the range, and the full size ladder below carries every mounting dimension from the specification sheet.
Who Makes These
Foshan Global Caster Co., Ltd, Guangdong, China has manufactured casters and wheels since 1988. The plant covers about 156,000 m² with 500-plus staff and in-house stamping, injection moulding and PU pouring, outputting roughly ten million casters a year. The catalogue holds 21,000-plus models, 600-plus of them as standing stock, certified to ISO 9001 and ISO 14001, with over 100 patents. The EH4 line is built on that in-house stamping and moulding, not sourced and relabelled.
Flagship Model: EH04-21-150S-402
This is the 6-inch (150 mm) swivel, iron-core polyurethane tread on a roller bearing, blue-zinc pressed steel fork, top-plate mount. It is the size most heavy platform trucks, machine relocation carts and loaded racks land on when the route runs on concrete or steel plate.
| Item | Specification | Picture |
|---|---|---|
| Swivel SKU | EH04-21-150S-402 | ![]() |
| Wheel diameter × width | 150 × 50 mm | |
| Load capacity | 410 kg per wheel | |
| Tread | Iron-core polyurethane | |
| Bearing | Roller bearing | |
| Mounting height | 192 mm | |
| Swivel radius | 115 mm | |
| Dual-brake swivel radius | 145 mm | |
| Top plate | 114 × 100 mm | |
| Hole spacing | 84 × 71 mm | |
| Hole diameter | 11 mm |
![]() |
![]() |
![]() |
| EH04-21-150R-402(Rigid counterpart) | EH04-21-150SB-402(Dual-brake swivel) | EH04-21-150SC-402(Side-brake swivel) |
Full Size Ladder — Top Plate
Same heavy-duty fork family across the range, roller bearing and blue-zinc finish on every size. Each diameter ships as swivel (S), rigid (R), swivel with metal dual brake (SB) or swivel with side brake (SC) on the same plate footprint. Load figures below are per wheel; the iron-core PU, super PU and phenolic treads share the PU-family rating, while the cast-iron treads run slightly higher.For more information, please click here to contact us.
| Wheel | Ø × width (mm) | Load / wheel, PU-family (kg) | Load / wheel, cast iron (kg) | Bearing | Mounting height (mm) | Swivel radius (mm) | Dual-brake radius (mm) | Plate (mm) | Hole spacing (mm) | Hole dia (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| 4 inch | 100 × 50 | 280 | 290 | Roller | 145 | 80 | 122 | 114 × 100 | 84 × 71 | 11 |
| 5 inch | 125 × 50 | 350 | 360 | Roller | 167 | 96 | 132 | 114 × 100 | 84 × 71 | 11 |
| 6 inch | 150 × 50 | 410 | 420 | Roller | 192 | 115 | 145 | 114 × 100 | 84 × 71 | 11 |
| 8 inch | 200 × 50 | 420 | 430 | Roller | 243 | 150 | 150 | 114 × 100 | 84 × 71 | 11 |
Tread Choices at the Same Size
Within each diameter the same fork pairs with four tread families, so the floor and abrasion duty drive the choice rather than the price of the bracket:
● Iron-core polyurethane (402) — resilient roll, protects concrete and steel plate, lower push force than a solid hard wheel. The flagship 6-inch uses this tread.
● Super polyurethane (304) — all-PU wheel for quieter roll and floor protection where a metal core is not needed.
● Phenolic (209) — hard, oil- and grease-resistant wheel for rough shop floors and oily environments.
● Cast iron (701) and V-groove cast iron (702) — highest abrasion resistance for slag, rough floors and rail-guided tracks; hard on finished floors and noisier.
![]() |
![]() |
![]() |
![]() |
| Iron-core polyurethane | Super polyurethane | Cast iron | V-groove cast iron |
What You Are Pay For Under the Skin
Roller bearing for heavy, slow movement
The EH4 uses a roller bearing rather than a plain bore. At a loaded platform, rollers carry the radial load across a line contact, so the wheel starts and keeps rolling under weight that would drag a bushing. It suits heavy carts moved daily at walking pace; for very high-frequency light-duty push, a ball-bearing family starts rolling marginally easier.
Fork and plate spread the load
The pressed steel fork and the 114 × 100 mm plate spread the point load across the chassis rail. The 84 × 71 mm hole spacing and 11 mm holes match the standard heavy-duty plate pattern; bolt to the frame builder’s tube gauge, not to a tighter torque than the frame itself carries.
Tread matched to the floor
Iron-core PU and super PU protect smooth concrete and steel plate and roll with less noise. Phenolic and cast iron take abrasion and oil but will mark or dent a fragile epoxy or polished surface. Put a cast-iron wheel on a finished floor and the marks are on you, not the wheel.
Brakes on the steering corners
The SB dual brake locks both the rolling wheel and the swivel raceway, holding the cart dead at a work cell. The SC side brake locks the rolling wheel only and leaves the raceway free to turn. Pair rigid casters at the trailing end when the cart must run a straight line without wandering.
Worked Load Example
A loaded platform truck carries 1,200 kg including the frame.
○ Four casters: 1,200 ÷ 4 = 300 kg per wheel under even loading.
○ The 5-inch PU-family model at 350 kg per wheel clears it; the 6-inch at 410 kg clears it with headroom for an uneven corner, a bumped threshold and daily push traffic.
We would step up to the 6-inch where the cart moves all day, and hold the 5-inch for lighter, steadier routes.
If the worst corner of your cart runs above 430 kg per wheel, this bracket is not the right series — move to an extra-heavy plate family rather than running four 8-inch wheels past their rating.
Where These Belong
● Heavy platform trucks and material-handling racks on concrete and steel plate.
● Machine relocation and installation carts moving equipment between work cells.
● Warehouse tugger trains and loaded stock carts on level industrial floors.
● Workshop fixtures and tool carts carrying dense, heavy parts.
When To Pick Something Else
If your load is below 150 kg per wheel, a medium-duty plate series covers it and the EH4 fork is overbuilt. If the floor is fragile epoxy and noise matters more than abrasion, tell us the surface; a softer elastomer tread from another family rolls quieter than phenolic or cast iron. For washdown or corrosive areas, this blue-zinc line is not the corrosion-resistant answer — a dedicated corrosion-protected family is the right direction.
FAQ
How many casters should a heavy platform use?
Four for symmetric loads. Long, narrow or offset equipment often runs six to spread the load more evenly over uneven floors.
Swivel or rigid on which corners?
Two swivel at the steering end and two rigid at the trailing end for hand-pushed carts. Four swivels, braked where needed, for equipment repositioned in tight cells.
What does the EH04-21 bearing code mean?
The first digit after the series is the bearing: 2 is roller bearing. The second digit is the bracket finish: 1 is blue zinc. The trailing three digits are the tread family.
Does the SB dual brake lock the swivel?
Yes. The SB dual brake locks the rolling wheel and the swivel raceway together. The SC side brake locks the rolling wheel only.
Can the plate hole pattern be changed?
The 114 × 100 mm plate, 84 × 71 mm spacing and 11 mm holes are the standard pattern. Other hole patterns or mounts go through OEM/ODM; send the drawing and we confirm feasibility before quoting.
Lead time and warranty?
One-year warranty under normal use; standard lead time about 30 days, with 600-plus catalogue models held as stock. We reply with a quote and a 2D drawing for the exact SKU you select.
Send Us the Load and Floor, We Quote the SKU
Tell us the loaded weight, floor material, available mounting height, plate or stem, and whether you need a brake. We reply with the wheel size, the per-wheel rating after margin, and sample SKUs to trial on one cart. If a lighter series covers the job, we say so.For more information, please click here to contact us.
Post time: Nov-16-2026










