Polyurethane Caster Stainless steel Shopping Trolley Bolt Hole PU Wheel

Simple creation and invention are usually very important, and casters also have this characteristic. At the same time, the development trend level of a big city is usually positively correlated with the application of casters. The usage rate of casters in big cities is very high.

1. Reciprocating damage test:

The reciprocating damage experiment of casters simulates the flipping of casters in daily applications. The caster manufacturer should carry out a two-point experiment on whether there are obstructions. During the whole experiment, no casters or other components are allowed to get rid of, and each caster is completed when the experiment is completed. It should be able to promote all its normal functions. After the experiment is carried out, the rotation around the axis or the effect of the braking system cannot be destroyed.

2. Accurate measurement of flip friction resistance and rotation friction resistance:

When the caster angle of the kingpin moves or its driving direction is manipulated, the force must be transmitted to the caster angle of the kingpin according to the object and get rid of the frictional resistance. Friction resistance lies in: load carrying capacity, wheel diameter, wheel material, wheel surface appearance and electromagnetic oscillation of continuous casting, etc.

3. If the tire rubber is seriously damaged or loosened, it is very likely to cause instability, steam leakage, abnormal load, damage to the bottom plate, etc. The caster manufacturer immediately removes the damaged tires and rolling bearings, which can reduce the cost caused by the suspension of production due to the damage of the caster. Fee damage.

4. After regularly inspecting and repairing the wheels, make sure whether the anchor bolts and nuts are tightened, and try to apply locknuts or locknuts on all anchor bolts. If the anchor bolts are loose, they should be tightened immediately. If the wheel in the fixed bracket becomes loose, the wheel will be destroyed or unable to rotate.

5. Load test:

Casters should run smoothly on the road from start to finish, but this is basically a purely theoretical situation. Casters leave the temporary jagged surface of the pavement, or go beyond thresholds, rails and pits. Therefore, when they are suddenly overweight or three-quarters of the casters hit the ground, they must install all the furniture.

In short, the above are some methods to ensure the quality of the casters. Among them, the inspection equipment to ensure the quality of the casters is very important. For our consumers, often only the appearance of the casters can be seen, so the quality of the casters appears to be good or bad from the appearance of the casters. More practical. Generally, industrial casters are more durable than other casters and have a longer practical life!